[NEW] US Air Freight is now live · 3-6 business days pickup · National Hotline 4000055859

INTERCARGO Issues Practical Guidelines for Safer Ship-to-Ship Transfers on Bulk Carriers

Industry News 13 min read Updated 2026-11-16 Source: Hellenic Shipping News

Key takeaways

  • 散货船船对船(STS)过驳不是新鲜事。
  • INTERCARGO 针对散货船发布了船对船过驳Operations指南,Coverage散货船之间的过驳,也涉及驳船、转运吊机、浮吊和转运单元参与的场景。
  • 计划在两条船靠上之前就得开始。

Summary of this article. Figures and policies are subject to the latest official announcements and live quotes.

Ship-to-ship (STS) transfers are well established in dry bulk shipping, used when draught restrictions, limited port infrastructure or the absence of a suitable berth make direct loading or discharge impractical. But putting two vessels alongside to move cargo introduces risks that are quite different from conventional terminal work.

INTERCARGO has published ship-to-ship transfer guidelines for bulk carriers, covering operations between bulkers as well as transfers involving barges, transloaders, floating cranes and transshipment units. The guidance is built around three questions: are the vessels and location suitable, is the operation properly planned, and are the risks being effectively controlled throughout the transfer?

Planning starts well before the vessels come alongside. The proposed transfer location should be assessed for water depth, under-keel clearance, traffic, weather exposure, currents, security, local requirements and the availability of tugs and emergency support. Where an STS service provider is involved, due diligence should establish that the provider has suitable experience, competent personnel, appropriate equipment and effective safety and emergency procedures.

Vessel compatibility is a key part of planning. Two vessels may each be capable of STS operations without being suitable for operating alongside each other. The assessment should consider vessel dimensions, draught and freeboard; hull configuration and projecting structures; hatch positions and cargo gear operating envelopes; mooring arrangements and equipment; fender requirements; anticipated changes in freeboard during transfer; cargo and ballast sequences; and tug and emergency arrangements. These considerations should feed into a Specific STS Plan for the operation.

There is no single environmental limit suitable for every STS operation. Wind, waves, swell, current and passing traffic can influence vessel movement, fender loads and mooring forces. Vessel size, displacement, freeboard, mooring arrangements and the degree of shelter at the location all affect how the vessels respond. The Specific STS Plan should establish clear operational limits and identify when cargo operations should be suspended or the vessels separated. The Master should retain the authority to delay, suspend or terminate the operation where conditions are considered unsafe.

Fendering and mooring form the physical connection between the vessels and require careful planning. Fenders should be suitable for the vessels involved and the expected operating conditions, with sufficient stand-off to prevent contact between hulls or projecting structures. Their condition, certification, pressure and deployment arrangements should be verified before use. The mooring arrangement should be agreed before the operation and should account for changes in draught and freeboard as cargo and ballast are transferred. Once alongside, moorings and fenders require continuous monitoring. Changes in line leads, tension, chafing, fender position or vessel movement may indicate that the original arrangement is no longer providing the intended level of protection.

STS planning does not end once the vessels are safely alongside. The cargo-transfer sequence should maintain adequate stability and keep shear forces and bending moments within permissible limits throughout the operation. Ballasting, draught, trim, list and changes in freeboard should be monitored as the transfer progresses. Cargo equipment also requires particular attention. Crane outreach, grab movement, conveyors and other equipment may operate close to hatch coamings, hatch covers or the adjacent vessel. Excessive movement can result in structural damage, cargo spillage or injury. The cargo plan should therefore establish agreed transfer rates, cargo sequences, equipment limitations and stop-work criteria.

The human element should not be overlooked. STS operations can place additional demands on Masters and crews already managing navigation, anchoring, cargo operations and routine shipboard responsibilities. Operators should consider whether sufficient rested personnel are available for mooring, cargo watches, emergency duties and eventual unmooring. Roles, responsibilities, communication channels and emergency signals should be clearly understood before operations commence. Effective communication between the vessels is particularly important. Primary and backup communication methods should be agreed and tested, together with a common working language.

INTERCARGO's publication includes practical material such as checklists covering vessel compatibility, preparations before commencing STS operations, preparations before mooring, preparations before cargo transfer, preparations before unmooring, and due diligence of STS service providers. It also contains practical information on fender selection, mooring arrangements and cargo operations. These tools are most valuable when incorporated into the operator's existing safety management procedures and used during the planning and execution of individual operations, rather than simply retained on board.

Post Reply

YourEmailAddressWill Not Be Published。 必填项已用 * Labeling

US NETWORK US Warehouse Network · Port-to-Warehouse Distance Reference Click a Marker for Details · Port-to-Warehouse / Warehouse-to-Warehouse Routes Available Map Data © OpenStreetMap · Routing © OSRM
Select Origin and Destination, Then Click to Search
The Map Will Draw the Route and Calculate Mileage
Enter Any US Address, City Name, or ZIP Code to Search
Mileage is a Highway Reference Value, Excluding Loading, Unloading, and Customs Clearance Time
Owned / Partner Warehouses Major Ports of Entry Inland Hubs Get Route Custom Address FBA Warehouse
Free Tools
Call UsGet a Quote