Onboard carbon capture and storage (oCCS) is moving beyond concept and pilot stage. Amine-based post-combustion capture is the most mature marine option and the only technology with classed commercial installations, with full-scale systems capturing around 30% to 40% of CO2 emissions; larger pilots target about 70%.
In 2024, Eastern Pacific Shipping's Pacific Cobalt became the first classed commercial oCCS installation under Lloyd's Register's Emission Abatement Carbon Capture & Storage notation, while Solvang's Clipper Eris is testing a full-scale system designed to capture around 70% of the CO2 from its main engine.
Capture rate is not the only variable. Running the system adds 15% to 30% to fuel consumption in current applications. A 70% gross capture with a 15% fuel penalty would deliver an estimated tank-to-wake CO2 reduction of around 44%, though waste-heat recovery can trim that penalty. Actual emissions reduction and cost vary widely by ship and trade, making vessel suitability central to the business case.
Panos Mitrou, LR Senior Vice President of Shipping Strategy, said onboard carbon capture can be an important part of shipping's decarbonisation toolkit, offering a realistic pathway for the right vessel types and trades while fuel supply chains, infrastructure and regulations continue to evolve.
The strongest opportunities are vessels with sufficient remaining trading life and space for the equipment. Medium range and chemical tankers on EEA routes make frequent port calls, allowing captured CO2 to be offloaded, while EU carbon-price exposure raises the value of reducing emissions. LNG-fuelled vessels and LNG carriers can use cold energy from vaporisation to liquefy captured CO2, cutting additional power needs. Short-sea and feeder vessels benefit from predictable routes and regular offloading.
Without such conditions, the case weakens. Ships with limited trading life, little carbon-price exposure or poor access to offloading facilities are less likely to justify the investment. Onboard storage is limited, capping how long the system can run before captured CO2 must be removed, so voyage length and offloading opportunities directly affect how much can ultimately be captured.
The decisive challenge lies ashore. Captured CO2 must enter a transport and storage network leading to permanent storage or an eligible use. Few ports can receive ship-captured liquefied CO2, and many existing facilities are designed for food-grade CO2 that may not suit exhaust-derived streams. Development is furthest ahead in north-west Europe, supported by emerging North Sea networks, but access remains limited elsewhere.
Regulation is also catching up. The EU ETS can recognise captured CO2 that reaches qualifying permanent storage or utilisation, while FuelEU Maritime does not yet include oCCS in its greenhouse-gas intensity calculations. The IMO is still developing a global framework covering safety, testing, verification and carbon accounting.
For Chinese shippers on the transpacific, the technology will not change rate structures in the near term, but it will gradually feed into carriers' compliance costs and fleet deployment. If partner carriers begin deploying carbon-capture-equipped ships on European routes, capacity planning and surcharge terms on those lanes are worth watching.
